faxage

Scan to Fax Tips

One of the most frequent challenges in using online fax services is how best to fax traditional, paper-based documents.

Generally, this involves using a scanner or all-in-one printer to scan them on to your computer and then either faxing via email or by uploading through the service provider's website.

While the capability to scan documents has been available with inexpensive devices for some years, there are some fax-specific considerations to keep in mind when creating your document.


What is the standard fax resolution?


First, it helps to understand fax resolutions and set your scan dpi to match those as closely as possible. The most common resolutions for faxing and corresponding 'best' scanner setting are:

  • Hyperfine - 408x391 - Scanner at 400 dpi
  • Fine - 204x196 - Scanner at 200 dpi
  • Normal/Low - 204x98 - Scanner at 200 dpi

Higher-end fax machines and fax services that support all capabilities - such as our Internet fax by FAXAGE service - can support all resolutions up to hyperfine, and this will result in the cleanest images. However, not all fax services or fax machines can do that. When in doubt, 200 dpi is a good general setting to use.

Can I color fax?


In general, you cannot fax in color. Fax is traditionally a black-and-white medium, as color faxing is relatively uncommon. Please note that black-and-white faxing is not grayscale, but plain-old black-and-white. We cannot possibly stress this too much: no matter what fax service you use, your results will almost always be better if you set your scanner to black-and-white and NOT color fax or grayscale!

How do I adjust fax contrast?


Wondering how to make your faxed documents lighter or darker? Faxes look 'cleaner' when fonts are not blurry and edges are crisp. It also really helps out the recipient with reading what you sent them. One way to help your document show its best face to the world is to set the contrast as high as possible on your scanner.

Final Takeaways:


For best results with scanning to fax, remember these three key points:

  • Set the right resolution - 200 dpi is a good, general choice
  • Set for black-and-white scanning - not color or grayscale
  • Crank up the contrast as far as possible

Happy Faxing!

FAXAGE® is a registered trademark of EC Data Systems, Inc.

© Copyright 2004-2024 EC Data Systems, Inc. all rights reserved